Show the number+335 86 24 00 26

Used Steyr Spare Parts

20 produits disponibles

A Steyr tractor remains rare in France, and that’s exactly where finding parts becomes challenging: few dealers, long supply times, and part numbers that change from one generation to another. TMC Bejenne dismantles Steyr tractors and offers their inspected used parts: front axle, lifting system, bodywork and cabin. These original parts cost 30 to 70 % less than new.

 Axle Housing(2)
 Bodywork(1)
 Complete Rear Axle(1)
 Cooling systems(1)
 Door(2)
 Front 3-point linkage(1)
 Front Axle Bevel Gear Set(1)
 Hitch(1)
 Hood(1)
 Hydraulics(2)
 Lower lift arm(2)
 Stabilizer(1)
 Upper Arm(1)
 Vérin(1)
 Wheel hub(1)
 Wheel Reducer(1)

Steyr Tractor: Austrian Engineering Close to Case IH

Steyr is an Austrian brand, with tractors manufactured at the St. Valentin plant. Since its merger with Case IH in the mid-1990s, it has been part of the same group as New Holland. Several recent series share their technical base with Case IH models from the same era. Steyr tractors have long been favored in livestock farming and hilly regions for their compactness and sturdy front axle. This connection offers alternatives when a Steyr part is missing, provided the manufacturer’s reference is verified.

Steyr Parts Available at TMC Bejenne

  • Front Axle and Steering: bevel gears, wheel hubs, steering cylinders.
  • Lifting System: lower arms, upper arms, stabilizers, and lift distributors.
  • Cooling: radiators and engine circuit components.
  • Bodywork and Cabin: bonnets, grilles, left and right doors.
  • Hitch: hitch steps, subject to availability.
  • Inventory: over 25,000 references in stock, 90% of requests fulfilled.

Steyr 9115 and 9000 Series: Start with the Serial Number

The Steyr 9115 is among the most frequently dismantled models at our facility. Within these series, two tractors with the same model name may have different front axles or cabins depending on the year and options. The best starting point is always the serial number, found on the manufacturer’s plate, complemented by the reference engraved on the removed part. A photo of the part in place helps significantly for bodywork and cabins.

Steyr, Case IH and New Holland: What Are the Equivalences?

  • Recent Series: some components are shared with Case IH models of the same generation.
  • Older Series: unique Steyr design, few equivalents.
  • Bodywork: specific to each brand, even if based on a common platform.
  • Hydraulics: distributors and cylinders should be compared by their fittings and flow rates.
  • Methodology: every equivalence is verified against the manufacturer's reference before shipping.

Tractor Dismantling Since 1945

TMC Bejenne has been dismantling tractors since 1945 on an area of 11 hectares in Naintré. Each Steyr tractor is disassembled by our specialized technicians, then its parts are cleaned, inspected, and catalogued by model. You receive an original part that matches the manufacturer’s specifications, shipped throughout France — including heavy components like front axles or cabins, safely on pallets. Our advisors confirm compatibility at 05 86 24 00 26.

Yes. The Steyr brand is still produced in Austria within the group that also includes Case IH and New Holland. It is mainly older series, such as the 9000 range, that present challenges regarding parts: the manufacturer's catalog no longer keeps pace, which is why original used parts are valuable.

For some recent series, yes, because they share their technical base with Case IH. For older Steyr models, it’s rare. In all cases, our advisors compare the manufacturer’s references of both parts before recommending a fit. Other brands are listed on our all brands page.

The Steyr network is limited in France and new parts are often scarce for older series. A dismantling specialist is the safest option: parts come from identified tractors and are inspected before sale. Contact us with the model and serial number; we check actual stock availability.