Used Tractor Rear Axle
3 available products
TMC Bejenne offers used 4x4 rear axles for agricultural tractors, sourced from the dismantling of selected machines in our workshop in Naintré. Whether you need a complete rear axle, a axle housing, or a rear axle casing, our permanent stock covers the most requested components for 4x4 tractors of all power classes and major brands. Since 1945, the TMC Bejenne team has supported agricultural professionals by supplying reliable, immediately available used tractor parts.
4x4 Tractor Rear Axle: Components and Wear Points
The rear axle is the central transmission component of a 4x4 tractor: it receives torque from the gearbox output, distributes it to the rear wheels via the half-shafts, and controls the front axle drive on all-wheel-drive tractors. Its main wear parts include the axle housing (a side casing housing the half-shaft and wheel reducer), the differential, the bevel gear set, and the main rear axle housing.
Damage to any of these elements typically manifests as bearing noises, lateral play on the wheels, or an oil leak on the axle housing seal. Replacing it with an original used part, inspected before shipping, allows you to get your tractor back in operation without waiting for new parts supply delays, at a significantly lower cost.
Agricultural Tractor Dismantling: 4x4 Rear Axles Available at TMC Bejenne
TMC Bejenne does not operate like a standard agricultural scrapyard: each tractor entering dismantling is assessed in our workshop before disassembly, and every part is individually inspected before being stocked. Available 4x4 rear axle components include the following categories:
- Complete rear axles: fully assembled units with differential, bevel gear, and axle housings, ready to install
- Rear axle housings: left and right sides, with or without wheel reducer depending on models
- Rear axle casings: main casings and covers, condition verified in our workshop
- Bevel gear sets: pinions and crowns, checked for play and tooth wear
- Rear axle differentials: open and locking differentials available according to stock
- Wheel shafts and pivots: common wear parts on heavily used 4x4 tractors
Our stock of over 25,000 references is continuously replenished by incoming dismantled machines. Contact the TMC Bejenne team at 05 64 25 06 39 to check availability for your model.
Used Tractor Front Axle: The Complement to the 4x4 Rear Axle
On a mechanically all-wheel-drive 4x4 tractor, the front axle is driven by the rear axle via a longitudinal transmission. Both components work in tandem and face similar stresses. TMC Bejenne also offers used complete front axles for all-wheel-drive tractors, with references covering the same brands as the rear axles.
Most used front axle requests relate to the John Deere 6030 to 6R series, the Massey Ferguson 5400 to 8700 series, and the Deutz-Fahr Agrotron M and X series, which are the most represented 4x4 tractors in our dismantling stock.
Used 4x4 Tractor Parts by Brand at TMC Bejenne
The used 4x4 rear axles available at TMC Bejenne cover the main agricultural tractor brands found in French farms:
- Case IH: Puma, Maxxum, JXU and Farmall series; complete axles and housings in stock
- New Holland: T6, T7, TM and TS series; rear axle components well represented
- John Deere: 5E to 7R series; with axle housings and casings available based on arrivals
- Massey Ferguson: 5400 to 8700 series; complete rear axles and spare parts
- Deutz-Fahr: Agrotron 100 to 7250 TTV series; parts specific to Deutz transmissions
- Fendt: 300 Vario to 900 Vario series; available depending on stock
For less common brands or older series, contact our team directly at 05 64 25 06 39: our stock evolves weekly with new dismantling arrivals.
The exact tractor model and its serial number are the most reliable information. The manufacturer’s reference number for the axle or part to replace, visible on the component or in your machine's spare parts catalog, allows direct identification without risk of compatibility errors between models of the same series but from different years. The TMC Bejenne team supports you with this identification at 05 64 25 06 39.
Yes. Used John Deere front axles are regularly available in our stock, especially for the 6030, 6R, and 7R series. Provide your tractor’s model and serial number to our team: they will check availability and compatibility before shipping the part.
The axle housing is the side casing of the rear axle: it houses the half-shaft, brake, and wheel reducer on tractors with lateral reducers. The rear axle casing is the central part housing the differential and bevel gear set. These two components have distinct functions and are not interchangeable. TMC Bejenne offers both as used parts, separately inspected before stocking.
Yes. Dismantling older tractors has been part of TMC Bejenne's activity since 1945, and complete rear axles for discontinued series (Massey Ferguson 390 to 6480, Case IH 745 to 956, Deutz-Fahr D and DX series) are regularly in stock. Availability for older series depends on arrivals. Contact our team at 05 64 25 06 39 to check.
Parts in stock are shipped quickly from Naintré, with delivery available in mainland France and internationally. For large components like a complete rear axle, shipping times depend on the carrier and destination. Our team will provide you with shipping details tailored to your order at 05 64 25 06 39.
Can't find the part you're looking for?
Fill out this form or contact us at 05 86 24 00 26