Used Side Panel for Combine Harvester

Role of the side panel: combine harvester casings and grilles

Side panels are part of a combine harvester's bodywork: they close off the sides and protect the components of threshing, separation, and cleaning. They limit dust ingress, channel airflow, and reduce noise. As they are opened at every greasing or adjustment, their hinges, hooks, and attachment points see heavy use. A deformed panel closes improperly, wears out its fastenings, and eventually cracks around the drillings. Replacing it with a genuine used part from the same model of combine harvester avoids any adaptation: the sheet metal aligns perfectly with the fixtures. An original panel also retains its reinforcements and contact foam, which replacements may not always replicate.

Side panels available at TMC Bejenne

• Panels for the threshing casing, with or without inspection flaps.
• Panels for the cleaning casing, around the fan and the grille and pre-grille.
• Panels with intake grilles for the engine compartment.
• Protective panels for lateral drive belts and pulleys.
• End panels for headers, right or left side.
• Complete hinged panels, including their hinges and hooks depending on dismantling.

Combine harvester header: the end panels

The header also features side panels. They close off the ends of the table, support dividers, and protect the drives of the reel and auger. Their shape depends on the type of header: rigid cereal header, belt header, or adjustable table header like the Claas Vario. On a Claas Vario, the end panel follows the moving table: please specify the working width and the model of the harvester. Headers for Case IH or New Holland also have their own end panels, ordered to match the exact table width. Discover other header parts in our combine harvester header range.

John Deere, Claas, New Holland combine harvesters: applicable models

• John Deere: panels dismantled from John Deere 2066, T660, and CTS combine harvesters, subject to availability.
• Claas: panels for Lexion 460 and Lexion 760, as well as header panels for Claas Vario.
• New Holland: panels for TX 65 and CR 9060 combines.
• Case IH: panels for Axial-Flow 1680 and 2388 combines.
• Laverda, Massey Ferguson, Deutz-Fahr, and Hesston: panels depending on incoming machines for dismantling.

Used combine harvester parts: verify compatibility

Within the same series, bodywork often changes from one generation to the next. Note the brand, model, and serial number of your combine harvester—whether a John Deere, Claas, or Laverda—as well as the concerned side, right or left. Include a photo of the panel and its fastenings: our specialized technicians will compare these details with the original machine before shipping. The page filters also allow displaying panels by brand and model. A specialist in used agricultural parts since 1945, TMC Bejenne dismantles harvesting machines on its 11 hectares site in Naintré and holds 25,000 references in stock. For quotes, call 05 86 24 00 26.