Show the number+335 86 24 00 26

Used Agricultural Hydraulic Parts

1488 available products

A three-point hitch that won't raise, a leaking distributor in the middle of a silage field: on a tractor, a hydraulic failure stops everything. TMC Bejenne offers a wide range of used agricultural hydraulic parts for tractors and combine harvesters: hydraulic pumps, distributors, cylinders, and hydraulic motors. Each part is inspected in our workshop before shipment and sold at 30 to 70% less than new.

 CASE IH(289)
 CLAAS(126)
 DEUTZ FAHR(76)
 FENDT(6)
 FIAT(9)
 FORD(18)
 JCB(7)
 JOHN-DEERE(214)
 Kubota(9)
 LANDINI(3)
 LAVERDA(61)
 MANITOU(16)
 MASSEY FERGUSON(87)
 MERLO(27)
 NEW-HOLLAND(434)
 RENAULT(52)
 SAME(23)
 STEYR(3)
 VALMET(2)
 VALTRA(11)
 Hydraulic Cooling(84)
 Hydraulic Distributor(38)
 Hydraulic Motor(2)
 Hydraulic Pump(11)
 Hydrostatic Motor(78)
 Reservoir(33)
 Vérin(441)
Hydraulic Distributor
Hydraulic Motor
Hydrostatic Motor
Hydraulic Pump
Hydraulic Cooling
Reservoir
Vérin

Used Agricultural Hydraulics: Dismantling at TMC Bejenne

Since 1945, TMC Bejenne has been dismantling tractors, combine harvesters, and agricultural equipment on a 11-hectare site in Naintré. Each hydraulic component is disassembled by our specialized technicians, cleaned, tested, and cataloged. This gives you access to OEM parts for both recent models and vintage tractors, some of which no longer have new parts manufactured.

Hydraulic Kits and Equipment Available at TMC Bejenne

Agricultural Tractor Hydraulic Distributor

The distributor channels oil between the lift, auxiliary outlets, and attached implements. A sticking spool or worn internal seal can cause an implement to lower on its own or controls to become unresponsive. We stock lift distributors, auxiliary distributors, and complete blocks: browse our hydraulic distributor range or provide the reference stamped on the body.

Agricultural Solenoid Valves and Hydraulic Valves

On recent tractors, electro-hydraulic distributors are operated by solenoid valves. Brake valves, check valves, and control solenoids are available as stock allows: a technician will check the coil voltage and connector with you before dispatch.

Single-Acting or Double-Acting Agricultural Hydraulic Cylinders

  • Single-acting: oil applies pressure in one direction; return is by the load, typical for lifts and dumpers
  • Double-acting: oil works in both directions, essential for loaders or powered tools
  • Before ordering, measure the stroke, rod diameter, bore diameter, and note the mounting type
  • Lifts, steering, loader, and additional cylinders available in our hydraulic cylinder range
  • Sales to professionals and private collectors restoring tractors

Tractor Hydraulic Circuit: Pump, Motors, Fittings, and Couplers

In a tractor’s hydraulic system, the pump sends oil under pressure, the distributor directs it, then cylinders and motors convert this pressure into movement. Fittings and couplers connect to your tools’ hoses: a worn coupler leaks oil and lets contaminants enter the whole system. If your tool uses a multi-connector, please specify: our advisors will verify compatibility with your tractor’s fittings.

Agricultural Hydraulic Hoses: Check Before Replacing Components

A porous or crushed hose can reduce flow and mimic pump failure. Have your mechanic inspect hoses before replacing a pump or distributor: the right used part is selected based on a proper diagnosis.

Agricultural Hydraulic Parts by Brand

Find the Right Hydraulic Part with TMC Bejenne

Prepare the brand, model, and serial number of your tractor or combine. A photo of the part and the reference stamped on its body speeds up the search. With 80 years of experience, TMC Bejenne matches this information with its stock and offers you the compatible part. Call our advisors at 05 86 24 00 26 or request a quote online.

On most tractors, the operating pressure ranges between 150 and 200 bar, sometimes higher on recent load sensing systems. It depends on the model and circuit type. Refer to the manufacturer’s manual and have your mechanic check the pressure if in doubt before ordering a pump.

A fluid is almost incompressible: the pressure created by the pump is transmitted fully throughout the system. Applied on the large surface of a cylinder piston, this pressure generates a force capable of lifting several tons. This principle powers the lift, steering, and loader of your tractor.

Leaks at fittings and seals, contamination of oil by impurities or water, overheating of the system, presence of air, and internal wear of the pump or cylinders. Confirm the failure’s cause with your mechanic before ordering agricultural hydraulic parts.

A slow lift or a lift that won’t raise the load, abnormal noise at operating speed, overheated or foaming oil, or stiffer steering can indicate a flow loss. These symptoms have various causes: have the diagnosis confirmed, then TMC Bejenne assists you in finding a tested used pump.

Can't find the part you're looking for?

Fill out this form or contact us at 05 86 24 00 26

* Required fields