Used Case IH Parts for Tractors and Combines

Case IH Tractors and Used Models: Maxxum, Puma, Magnum

TMC Bejenne’s stock aligns with the actual fleet of French farms. For recent tractors, the Case IH parts we most commonly stock concern the Maxxum (Maxxum 5120, Maxxum 5140, Maxxum 125), the Case IH Puma (Puma 160 CVX, Puma 180, Puma 240 CVX), and the MX series, from MX 110 to MX 170. For heavy-duty work, we also dismantle Case IH MX Magnum models (MXM 175, MXM 190) and Magnum 250, as well as CS 150 and CVX 130. Front axle, lift, cab, or hood: provide the exact model and serial number, our technicians verify compatibility before dispatching the part.

Online Shop: Case IH Spare Parts Catalog at TMC Bejenne

• Hydraulics: hydraulic pumps, distributors, steering cylinders
• Transmission: complete gearbox, shafts, clutches, power take-off
• Front axle and rear axle: axle noses, wheel reducers, differentials
• Lifting equipment: cylinders and arms, to maintain original lifting capacity
• Engine: blocks, cylinder heads, turbos, injection pumps
• Cabin and bodywork: seats, glass, hoods, fenders
• Electrical: alternators, starters, harnesses, control units

Used International Harvester Agricultural Tractor Parts

Case IH was born in 1985 from the merger of J.I. Case and International Harvester’s agricultural division. Many older generation IH tractors are still in use on farms: IH 743, IH 845 XL, 856 XL, 956 XL, 1056 XL, or 1455 XL. Their IH parts are no longer available at dealerships, but dismantling end-of-life tractors sustains a supply of used agricultural parts for these series.

Used Parts for IH 743, 845 and 856 XL Tractors

Rear axle, gearbox, lifting equipment, or cabin parts: TMC Bejenne maintains references for vintage tractors with the same quality control level as for recent models.

McCormick and Pre-1985 IH Tractor Spare Parts

In France, International Harvester long marketed its tractors under the McCormick name, especially those produced in the Saint-Dizier factory. Explore our Mac Cormick parts. More recent McCormick tractors made by another company since 2000 have their own page.

Red IH Tractors: Documentation and Community

Workshop manuals, exploded views, and exchanges among red tractor enthusiasts help to date vintage series. Once the model is identified, our technicians find the corresponding checked part.

Axial-Flow Combines: Threshing and Grain Handling

• Axial-Flow 1660, 1680, 2188, and 2388: the most represented generation in our dismantlings
• Axial-Flow 6088, 7130, and 8010 for newer fleets
• Threshing: rotors, concaves, sieves
• Grain transport: augers, elevators, hoppers
• Straw chopper: rotors and straw chopper casings
• Orders should be anticipated before harvest, from June to August

International Tractor Breakers: Dismantling at TMC Bejenne

Since 1945, TMC Bejenne has been purchasing end-of-life tractors, combines, and agricultural equipment on its 11-hectare site in Naintré. For Case IH and International Harvester tractors, every tractor dismantling is supervised, part by part, and machines in the process of dismantling continuously feed the stock. Components are cleaned, tested, inventoried, then stored among our 25,000 references. For you, this means a used part from an actual machine, with verifiable origin and control at the time of order.

Agricultural Tractor Breakers Near Me, by Region or Department

• One site only in Naintré, in Vienne, with shipments all over France
• Light parts as well as heavy components: gearboxes, front axles, complete cabins
• Same quality control process, regardless of your delivery department
• A single technical contact for farmers, contractors or CUMA, at 05 86 24 00 26
• An alternative to the dealer when the new part is no longer manufactured

CNH Parts Catalog and Case IH Exploded Views: The Right Reference

Most ordering errors come from a misidentified series or year. Before calling, note the serial number on the manufacturer’s plate and, if available, the reference engraved on the original part. A Case IH exploded view helps locate the exact component within an assembly.

CNH Portal and Original Spare Parts

The CNH manufacturer catalog provides the original reference for a new part. Submit it to TMC Bejenne: our technicians cross-check it with our used stock and confirm compatibility with your tractor.

Used Agricultural Parts Supplier: TMC Bejenne’s Commitments

• TMC Bejenne, specialist in used agricultural parts since 1945
• 90% of requests fulfilled from stock
• Systematic quality control of every Case IH part by specialized technicians
• All major agricultural equipment brands: New Holland , John Deere , Massey Ferguson
• Part of the Dubreuil group, a family-owned company

Engine, Front Axle, Hydraulics: The Key Components of a Case IH

For Case IH tractors, three categories regularly appear in requests. An engine from a Maxxum, a Case IH Puma, or a Case IH MX Magnum nearing end-of-life is often replaced faster by a checked used engine than by a full overhaul. On the front axle side, worn axle noses, spindles, and reducers can immobilize the machine at the worst moment. Hydraulic pumps and distributors control the lifting and steering. Each Case IH part from these categories comes from a closely monitored dismantling at TMC Bejenne and is tested in the workshop before shipping. For a full cab or front axle, specify the machine’s year: the offered Case IH part will match your series.

Specialized Site or Ad: What Changes for Your Case IH Part

• Compatibility verified via serial number before shipment
• Part cleaned and tested in workshop; not sold as-is
• Known origin: each part comes from a dismantled and inventoried machine at TMC Bejenne
• A technician reachable at 05 86 24 00 26 to clarify any question regarding serial numbers