Used JCB Parts

JCB Replacement Parts Catalogue at TMC Bejenne

The catalogue covers JCB agricultural telescopic handlers 531-70 Agri, 532-70 Agri and 526, as well as the JCB 3CX backhoe loader and models 530, 535-95, and 536, spanning multiple generations. TMC Bejenne offers both used genuine JCB parts and compatible aftermarket parts across hydraulics, transmission, and hitch components, depending on dismantling availability. Each reference is identified by model and year to ensure precise compatibility with your machine.

Available Genuine and Adaptable JCB Parts

• Front axles and rear axles, complete assemblies, wheel reducers
• Hydraulic cylinders and hydraulic circuits
• Gearboxes and transmission components
• Engine parts and cooling systems
• Cabin components: air conditioning, seats, glazing
• Electrical and chassis parts
• Axles and wheel hubs

JCB in Agricultural Operations: Telescopic Handlers and Backhoe Loaders, Common Uses

JCB telescopic handlers are daily workhorses for handling feed, livestock feeding, loading trailers, and cleaning livestock buildings. The 3CX backhoe loader complements this fleet for on-farm earthworks: ditch cleaning, access creation, and maintenance of farm roads. Such frequent use puts heavy demands on the hitch assembly, with repeated loadings and frequent tool changes, making it a common focus point in farm equipment maintenance.

JCB Hitch: Available Coupling and Lifting Components

• Telescopic handler hooks and hitch rings
• Boom pins and shackles
• Rear hitch hydraulic distributors
• Hoses and fittings for hitch circuits
• Compatible forks and buckets depending on model

Genuine or Adaptable JCB Parts: What’s the Difference for Your Machine?

A used genuine JCB part comes from a dismantled machine: same manufacturer reference, same manufacturing tolerances as your engine. An adaptable part, produced by a third-party supplier, covers the most common components (filters, seals, pads) at a reduced cost. TMC Bejenne advises based on use: genuine parts for critical components (hydraulics, transmission), adaptable parts for routine maintenance.

Routine Maintenance of a JCB Telescopic Handler or Backhoe Loader Before the Season

• Check the level and cleanliness of the hydraulic oil
• Grease the hitch points and boom pins
• Inspect the transmission condition and check for leaks
• Examine axles, tires, and wheel bearings
• Bleed the hydraulic circuit if the machine has been idle

Spare Parts for JCB 3CX in Agricultural Use

The JCB 3CX backhoe loader, common on many farms for handling and earthmoving tasks, accumulates hours stressing the front axle, boom cylinder, and gearbox. TMC Bejenne offers spare parts for JCB 3CX sourced from dismantled agricultural machines, inspected before resale. The complete front axle and wheel reducer are among the most requested parts.

How to Identify the Right JCB Part for Your Machine

• Note the serial number on the manufacturer plate, located in the cabin or on the chassis
• Record the exact model: 3CX, 531-70 Agri, 532-70 Agri, 526, 530, 535-95, or 536
• Provide the year of commissioning to the technical team
• Specify the relevant component: hydraulics, transmission, hitch, or axle
• Contact TMC Bejenne with these details to verify exact compatibility

Why Choose a Used JCB Part Over a New One

A new JCB part often immobilizes the machine due to supplier lead times during busy periods. Controlled used parts from TMC Bejenne offer significant savings, between 30% and 70% depending on the part, without compromising verified reliability at purchase. Every part is dismantled, tested, and inspected in our workshop before resale, following a circular economy approach rather than keeping unused new parts in supplier stock.

How to Order a JCB Part from TMC Bejenne

• Identify the model, year, and part required
• Contact the TMC Bejenne technical team at 05 86 24 00 26
• Receive availability confirmation and a quote
• Confirm your order to initiate shipping
• Reach out to the team for any compatibility questions before installation

TMC Bejenne, JCB Parts Supplier Since 1945

TMC Bejenne has been dismantling JCB machines of all generations since 1945, with over 25,000 references available across all brands. Every part is dismantled, tested, and inspected before resale, with a technical team ready to respond quickly to your JCB parts requests. To check part availability, contact TMC Bejenne at 05 86 24 00 26 specifying your machine's model and year.