Used Tractor & Combine Harvester Frames

54 available products

A cracked chassis, a deformed mounting point, or a worn hitch part compromises your equipment’s entire structure. TMC Bejenne offers used chassis parts for tractors, telehandlers, and combine harvesters: mast and apron, boom, hitch components, and diesel tanks. Each part is inspected in our workshop prior to resale, priced 30 to 70% below new.

Used Tractor Salvage: The Source of Our Chassis Parts

Turning to a tractor salvage yard is the first choice when a chassis or hitch part needs replacement. At TMC Bejenne, this approach applies to all machines dismantled at our Naintré facility: end-of-life tractors, telehandlers, and combine harvesters supply our stock of used chassis parts. Each structure is carefully disassembled to preserve reusable components, and every part is tagged with its original machine.

Tractor Spare Parts: Chassis at TMC Bejenne

  • Mast and apron, boom and sliding parts for telehandlers
  • Drawbar, hitch pin, hook, and hitch apron in our hitch range
  • Hitch ladder and locking lever
  • Used diesel tanks, inspected before shipping
  • Every chassis part is identified and verified prior to sale

Used Tractor Chassis: Key Points to Inspect

The chassis supports the hitch, cabin, and hydraulic components throughout the machine’s lifetime. Deformation or advanced corrosion in the frame can indicate major repairs, even on seemingly well-maintained tractors. Before buying a used tractor, or after an intensive season, prioritize inspecting welds and anchor points. TMC Bejenne assists you in identifying the chassis part to replace.

Tractor with Front Loader: A Chassis to Monitor

A tractor fitted with a front loader places additional stress on its chassis, especially at the loader’s mounting points. Check for cracks after several seasons of heavy use in these areas.

4x4 Tractor: Load Distribution on the Chassis

On a 4x4, the chassis distributes forces between front and rear axles. Uneven wear on mounting points may signal imbalance to be corrected before further structural weakening occurs.

Buying, Selling, and Buying Back Agricultural Equipment: Entrust Us With Your Tractor

  • An older tractor—even incomplete, without a cabin, or immobilized for a long time—retains value in spare parts
  • TMC Bejenne assesses your machine’s recoverable potential, chassis included
  • An alternative to classic selling when resale value is uncertain
  • Get your machine appraised through our equipment buy-back service or call 05 86 24 00 26

Used Agricultural Tractor: For Professionals and Individuals

Our fleet also includes complete machines: browse our selection of used agricultural tractors, available to farmers, ETA, CUMA, and private buyers. Before purchasing a used tractor, have the chassis, anchor points, and hitch inspected—it’s the framework that determines the machine’s service life. Parts and machines are shipped across France.

Old Agricultural Tractors and Telehandlers: The Chassis, the Backbone of Your Equipment

  • On a tractor, the chassis holds the hitch, hydraulic parts, and cabin
  • On a telehandler, the mast, apron, and boom perform the same load-bearing role during lifting
  • An original chassis part, even if old, remains sought-after as long as it is neither deformed nor cracked
  • Hence the steady demand for used parts for older agricultural tractors

Selecting Your Chassis Part According to Tractor Power

Your choice should start with your exact machine model, power, and type of work performed: a part for occasional use has different requirements than one supporting heavy loads daily. Check welds and mounting points, the zones most stressed during hitching or lifting. Finally, note the brand, model, and serial number—our technicians verify compatibility before shipping.

Chassis Brands Available at TMC Bejenne

TMC Bejenne: 80 Years of Expertise in Used Agricultural Parts

Since 1945, TMC Bejenne has supported farmers, ETA, and CUMA with over 25,000 references of used parts, including a constant stock of chassis parts for tractors, telehandlers, and combine harvesters. Our Naintré site, located in the Vienne region, covers 11 hectares. To identify a part compatible with your machine, contact our team at 05 86 24 00 26.

Workshop, Agricultural Dealer, or Certified Used Equipment?

  • Prices 30 to 70% lower than new parts from dealers
  • A part your agricultural workshop can install directly, without modification
  • Original manufacturer part, already field-tested on machinery
  • Inspection in workshop before each shipment
  • Large stock of chassis parts for tractors and telehandlers
  • Technical support to verify compatibility with your equipment

The diesel tank is attached to the tractor’s frame but belongs to the engine fuel system. At TMC Bejenne, it is offered in the diesel tank range and inspected in our workshop before resale. Call 05 86 24 00 26 to check compatible references.

Yes, provided the exact model compatibility is verified: mast, apron, and boom vary by telehandler brand and series. TMC Bejenne offers parts for Manitou, JCB, and Merlo, inspected before shipment.

Check for no deformation, cracks, or advanced corrosion, especially at mounting points and welds. A repair weld is not necessarily disqualifying but should be neat and localized. At TMC Bejenne, every chassis part is inspected before becoming available for sale.

The price of an agricultural tractor depends on its power, age, hours, and overall condition: a used tractor costs considerably less than a new model, but chassis and mechanical condition weigh heavily in its value. See our selection of used tractors or call 05 86 24 00 26 for pricing on specific machines.

Its value depends on overall condition, brand, and the state of chassis and mechanical parts. A tractor too damaged for classic resale still holds value as spare parts: TMC Bejenne can appraise it for this purpose at 05 86 24 00 26.

Can't find the part you're looking for?

Fill out this form or contact us at 05 86 24 00 26

* Required fields