Show the number+335 86 24 00 26

Used combine harvester complete cab

7 available products

A rollover at the edge of the field, a branch smashing the windshield, a rust-damaged frame at the base: on a combine harvester, the cab isn't always repairable. TMC Bejenne removes complete cabs from John Deere, New Holland, or Case IH combine harvesters that come into dismantling at Naintré and resells them after inspection to get your machine back in operation before the next harvest. For single parts, please also see our cab parts category.

 CASE IH(1)
 CLAAS(2)
 FORD(1)
 JOHN-DEERE(2)
 NEW-HOLLAND(1)

Used combine harvester cabs at TMC Bejenne

Since 1945, TMC Bejenne has been dismantling tractors and combine harvesters on an 11-hectare site in the Vienne region. Each combine cab is removed entirely, with its mounts, wiring harness, and controls, then inspected in our workshop: structure, mounting points, glass, and air conditioning system. A well-maintained cab outlasts the machine it belongs to, making used cabs a practical option for mechanically sound combine harvesters.

Combine harvester cabs by brand: New Holland, Claas, John Deere...

  • John Deere: cabs for S660, T560, and T660 combine models
  • New Holland: CR 9060 combine cab
  • Case IH: Axial-Flow 2188 cab
  • Claas, Fendt, and Massey Ferguson: depending on machines dismantled
  • Looking for a specific model not listed? Call 05 86 24 00 26; our stock of combine harvester cabs is updated with each dismantling

A cab matched to its combine chassis

A combine harvester cab is not universally interchangeable like a tractor cab. On a New Holland CR or a John Deere T-series, the cab supports the console, header controls, and part of the wiring harness. Note the exact model, year, and serial number: our technicians verify compatibility before any order.

Key inspection points on a combine cab

  • Frame and pillars: no deformation, no repair welding, no corrosion at the base
  • Cab mountings and suspension parts: condition and play
  • Doors, glazing, and seals: dust-tightness, hinges, and locks
  • Console, displays, and wiring: presence and connector length
  • Air conditioning: evaporator, pipes, and cabin filter

Combine harvester without a cab: can one be added?

Many older combine harvesters left the factory with an open driving position. Some models offered an optional cab installed on manufacturer-designated mounts. For these series, a used cab from the same machine model can be fitted. Without these mounting points, fitting a cab becomes a complex undertaking. Send us the model and a photo of the driving station, and we'll tell you if a compatible cab is available in our inventory.

Complete tractor and telehandler cabs

Ordering a complete cab from TMC Bejenne

Prepare the brand, model, year, and serial number of your combine harvester, along with some photos of the current cab. Our technicians cross-check this information with our 25,000 references and confirm availability. Call 05 86 24 00 26 or request a quote from the product page.

No, except in rare cases within the same machine family. A John Deere T-series or New Holland CR cab is specific to its chassis, controls, and wiring. Provide the exact model and serial number, and our technicians will confirm compatibility before any order.

Shipping is organized case by case after compatibility is confirmed: pickup at Naintré or shipment within France on a pallet or dedicated transport, depending on the cab’s dimensions. Call 05 86 24 00 26 for a shipping quote.

If the frame and pillars are sound, often a door, glazing, or suspension part is sufficient. A full cab replacement is necessary after a rollover or when corrosion affects the base. Send us photos, and our technicians will guide you to the most economical solution.

Can't find the part you're looking for?

Fill out this form or contact us at 05 86 24 00 26

* Required fields