Used Lely Spare Parts
1 produits disponibles
In haymaking, a baler that leaves the windrow on the ground costs you the entire cut. TMC Bejenne dismantles Lely equipment and offers controlled used parts, focusing primarily on the round balers from the RP series: pick-up, tying, and baler rollers, priced 30 to 70% below new.
Lely RP Balers: A Welger Legacy
The Lely RP balers, including the RP 445, are descendants of the Welger balers, acquired by Lely in the late 2000s. Their haymaking operations were later absorbed by the AGCO group, and today Lely primarily focuses on livestock. For these balers, original used parts remain a valuable solution, with possible equivalents from Welger models of the same generation.
Lely Mower and Rotary Harrow Parts at TMC Bejenne
- RP Balers: pick-up, tying, rollers, and drives available as stock permits.
- Lely Mower Parts: gearboxes and chassis components sourced when machines are dismantled.
- Lely Rotary Harrow: crowns, gears, and shafts supplied as available.
- Inventory Highlights: 25,000 references across all brands, 90% of inquiries fulfilled.
Exploded View of Lely Rotary Harrow and Technical Documentation
The manufacturer publishes technical documentation, including exploded views of each rotary harrow, essential for identifying the part and its location. For us, the model, serial number, and the reference engraved on the removed part are sufficient. For tying and pick-up units, also provide a photo of the part in place, as two generations of the same baler may not use identical parts. Since 1945, TMC Bejenne has dismantled equipment over 11 hectares in Naintré, where Lely is stocked alongside John Deere , Massey Ferguson , and New Holland balers. Call us at +33 5 35 54 42 10.
No. Lely's haymaking operations, including balers, were taken over by AGCO. Many Lely balers remain in service; their original parts mainly come from dismantling, like those we offer, all verified against manufacturer references.
Often, on RP balers that trace directly back to Welger design, when the generation and chamber width match. However, this is not always the case: tying and drive system changes can alter dimensions. Our advisors compare manufacturer references before recommending a Welger part for your Lely baler.
The manufacturer's parts catalogue, commonly called the Lely parts catalogue, is available through the Lely network. It provides the exact part reference. Send us this reference along with the model and serial number: our advisors cross-check it with the used parts dismantled in our inventory.
No. Our expertise is in agricultural harvesting and traction machinery dismantled in our yard. For milking robots, please contact the manufacturer’s network. For balers and haymaking machinery, see our range of baler parts.