Show the number+335 86 24 00 26

Used New Holland Cylinders at the Best Price

160 available products

A faulty cylinder on your New Holland machine can stop a combine harvester in the middle of the harvest or prevent a tractor's lift from operating during sowing. TMC Bejenne offers a wide range of used cylinders sourced from dismantled New Holland equipment: combine harvesters, balers, round balers, and tractors. Every part is inspected by our specialized technicians in the workshop before shipping. This way, you get reliable components at a price significantly lower than new parts, supporting a circular economy approach.

Hydraulic Cylinder for Combine Harvester: At the Heart of the New Holland Hydraulic System

New Holland combine harvesters use numerous hydraulic cylinders: reel lift, threshing drum adjustment, concave adjustment, chaffer control, or discharge auger. On the TX (TX 36, TX 66, TX 68), CX (CX 760, CX 820, CX 860, CX 8050, CX 8080), and CR (CR 960, CR 980, CR 9060, CR 9070, CR 9090) series, the hydraulic system endures high pressures season after season. A worn double-acting cylinder results in longer lifting times, increasing mechanical play, or even complete blockage of a component during operation. Used hydraulic parts from dismantled New Holland machines allow quick repair without waiting for new part delivery times.

New Holland Cylinders Available at TMC Bejenne: Covered Machines and Functions

  • Single and double-acting hydraulic cylinders for TX, CX, and CR combine harvesters
  • Cylinders for round balers (BR 7070) and big balers (BB 960, BB 1290, BB 9070, BB 9080, BB 9090)
  • Cylinders for discharge auger, channel pressure, and reel lift
  • Cylinders for New Holland tractors: T7040, TM 115, TM 135, TM 150, TM 175, TS 115
  • Parts sourced from dismantling, workshop-checked, available immediately
  • Stock of over 25,000 references: savings of 30 to 70% compared to new parts

Steering and Cutting Cylinders: Two Critical Functions on Tractor and Combine Harvester

On New Holland tractors from the T7, TM, or TS series, the steering cylinder ensures precise turning, especially on soft ground where lateral forces are high. Internal wear or external leaks show up as increasing steering imprecision, particularly under load. On combine harvesters, the cutting cylinders control header lift, height adjustment, and positioning variations according to terrain relief. A reliable replacement part, sourced from dismantled end-of-life New Holland machines, restores full maneuverability without compromising pressure retention. TMC Bejenne also offers opening cylinders for hoods and side panels, as well as additional lift cylinders for three-point linkage.

Used New Holland Parts: The TMC Bejenne Quality Approach

  • Dismantling in workshop at the Naintré site (11 hectares equipment yard)
  • Visual and functional inspection of each cylinder before stocking
  • Seal tightness verified: rods, bodies, hydraulic fittings
  • Traceability of parts by original machine model
  • Shipping in France and internationally, rapid handling of urgent requests
  • TMC Bejenne has supported farmers, ETA, and CUMA since 1945

Electric Cylinder for Combine Harvester: The Alternative to Hydraulic Actuators

Recent combine harvesters increasingly use electric actuators for precise adjustments: concave position, sieve opening, chopper deflector adjustment. These electric cylinders differ from traditional hydraulic cylinders by their DC power supply and control via onboard electronic boxes. TMC Bejenne also offers used versions, sourced from dismantled New Holland equipment fitted with automated control systems. To check availability of a specific model, contact us at 05 86 24 00 26.

Before ordering, identify the exact model of your machine (TX, CX, CR, or BB for New Holland) and the cylinder function to be replaced: reel lift, threshing adjustment, discharge auger, or other component. Specify if the cylinder is single or double-acting and, if possible, the rod and body dimensions. Our specialized technicians can help identify the correct reference based on this information. Call 05 86 24 00 26 or consult our online catalog directly.

A cylinder is an actuator that converts energy (hydraulic, pneumatic, or electric) into linear movement. On a combine harvester or tractor, it controls lifting, pushing, adjustment, or cutting motions. Hydraulic cylinders remain the most common on agricultural machines: circuit pressure moves the rod and acts on the concerned component with significant force over a precise stroke. Electric cylinders take over for precision controls on modern machines.

The price of a used agricultural hydraulic cylinder varies depending on the machine type, cylinder model, and its overall condition. As a used part sourced through dismantling, you typically save 30 to 70% compared to the price of a new original part. TMC Bejenne provides quotes on request: contact us at 05 86 24 00 26 for a price tailored to your specific needs.