Q: What is a flexible agricultural grain auger?

A flexible agricultural grain auger is a conveyor with flexible flighting housed inside a flexible tube that transports cereals, pellets, or flour from one point to another on a farm. Thanks to its flexible design, it adapts to curved paths and various building layouts where a rigid auger cannot fit. It is widely used to feed silos, troughs, or grinders.

Q: What is the difference between flexible and rigid augers?

The rigid auger consists of a fixed metal tube with integrated helical flighting, giving it robustness for high flow rates on straight paths. It better withstands heavy use and long straight distances. The flexible auger sacrifices some flow capacity for greater installation versatility. The choice mainly depends on your farm’s layout and the volume of grain to handle.

Q: How to assess the condition of a used grain auger?

Before any purchase, check the wear of the flighting inside the tube: a thinned or deformed flight reduces flow and signals a costly replacement. Inspect the tube itself for cracks, holes, or corrosion. Run the motor to detect unusual noises or overheating. Ask the seller for usage history and operating hours.

Q: Which auger diameter should I choose for my farm?

The auger diameter directly influences its flow rate: a 60 mm diameter suits feeding troughs in livestock, 90 mm can reach up to 3,500 kg/h for larger buildings, while diameters from 120 to 200 mm fit cereal transfers to silos or bucket elevators. The higher your hourly volume, the larger the diameter needed.

Q: What maintenance is required after buying used?

After acquiring a used flexible grain auger , regular maintenance is necessary to extend its lifespan. Clean the tube systematically after each campaign to avoid residues that accelerate corrosion. Lubricate bearings according to manufacturer recommendations. Check transmission belts and replace them at the first signs of fraying. An annual inspection of the flexible flighting helps anticipate replacement before any breakdown during peak season.

Q: Which storage equipment is compatible with flexible augers?

The flexible auger is compatible with a wide range of storage equipment: grain silos, building storage cells, reception hoppers, livestock troughs, and bucket elevator bases. Its flexibility allows connection to equipment difficult to access in a straight line. It suits both cereal farms and livestock operations to feed grinders and automatic distributors.

Question 1

What is a flexible agricultural grain auger?

Accepted Answer

A flexible agricultural grain auger is a conveyor with flexible flighting housed inside a flexible tube that transports cereals, pellets, or flour from one point to another on a farm. Thanks to its flexible design, it adapts to curved paths and various building layouts where a rigid auger cannot fit. It is widely used to feed silos, troughs, or grinders.

Question 2

What is the difference between flexible and rigid augers?

Accepted Answer

The rigid auger consists of a fixed metal tube with integrated helical flighting, giving it robustness for high flow rates on straight paths. It better withstands heavy use and long straight distances. The flexible auger sacrifices some flow capacity for greater installation versatility. The choice mainly depends on your farm’s layout and the volume of grain to handle.

Question 3

How to assess the condition of a used grain auger?

Accepted Answer

Before any purchase, check the wear of the flighting inside the tube: a thinned or deformed flight reduces flow and signals a costly replacement. Inspect the tube itself for cracks, holes, or corrosion. Run the motor to detect unusual noises or overheating. Ask the seller for usage history and operating hours.

Question 4

Which auger diameter should I choose for my farm?

Accepted Answer

The auger diameter directly influences its flow rate: a 60 mm diameter suits feeding troughs in livestock, 90 mm can reach up to 3,500 kg/h for larger buildings, while diameters from 120 to 200 mm fit cereal transfers to silos or bucket elevators. The higher your hourly volume, the larger the diameter needed.

Question 5

What maintenance is required after buying used?

Accepted Answer

After acquiring a used flexible grain auger, regular maintenance is necessary to extend its lifespan. Clean the tube systematically after each campaign to avoid residues that accelerate corrosion. Lubricate bearings according to manufacturer recommendations. Check transmission belts and replace them at the first signs of fraying. An annual inspection of the flexible flighting helps anticipate replacement before any breakdown during peak season.

Question 6

Which storage equipment is compatible with flexible augers?

Accepted Answer

The flexible auger is compatible with a wide range of storage equipment: grain silos, building storage cells, reception hoppers, livestock troughs, and bucket elevator bases. Its flexibility allows connection to equipment difficult to access in a straight line. It suits both cereal farms and livestock operations to feed grinders and automatic distributors.

Used flexible grain augers - page 2

352 available products

Screw for NEW-HOLLAND CX 8050

Screw for NEW-HOLLAND CX 8050

Screw for NEW-HOLLAND CX 8050

Screw for NEW-HOLLAND CX 8080

Screw for NEW-HOLLAND CX 8080

Screw for NEW-HOLLAND CX 8080

Screw for NEW-HOLLAND CX 860

Screw for NEW-HOLLAND CX 860

Screw for NEW-HOLLAND CX 860

Screw for NEW-HOLLAND CX 860

Screw for NEW-HOLLAND CX 880

Screw for NEW-HOLLAND CX 880

Screw for NEW-HOLLAND TX 36

Screw for NEW-HOLLAND TX 36

Screw for NEW-HOLLAND TX 64

Screw for NEW-HOLLAND TX 64

Screw for NEW-HOLLAND TX 66

Screw for NEW-HOLLAND TX 66

Screw for NEW-HOLLAND TX 66

Screw for NEW-HOLLAND TX 66

Auger screw for CASE IH AXIAL-FLOW 2388

Auger screw for CASE IH AXIAL-FLOW 2388

Auger screw for CASE IH AXIAL-FLOW 2388

Auger screw for CASE IH AXIAL-FLOW 2388

Auger screw for CASE IH AXIAL-FLOW 2388

Auger screw for CASE IH AXIAL-FLOW 2388

Auger screw for CASE IH AXIAL-FLOW 2388

Auger screw for JOHN-DEERE CTS

Auger screw for JOHN-DEERE CTS

Auger screw for JOHN-DEERE CTS

Auger screw for JOHN-DEERE CTS

Auger screw for LAVERDA 2350

Auger screw for LAVERDA 2350

Auger screw for NEW-HOLLAND CR 8080

Auger screw for NEW-HOLLAND CR 8080

Auger screw for NEW-HOLLAND CX 820