Used John Deere hydraulic pump
1 available products
A hydraulic pump losing power on a John Deere tractor or combine harvester quickly halts operations, both during peak season and daily work. TMC Bejenne offers used John Deere hydraulic pumps sourced from dismantling, as well as the entire associated circuit: hydraulic cylinders, hydraulic distributors, and hydraulic motors. Each part is inspected in our workshop prior to shipping, ensuring quick reinstallation at a cost significantly lower than new parts.
Hydraulic PTO pump: a standard setup on John Deere
The hydraulic pump on the power take-off (PTO) is fitted on many John Deere tractors used with high-flow implements such as mulchers or slurry pumps. This setup, independent from the main hydraulic circuit, connects directly to the PTO without engaging the tractor's original pump. TMC Bejenne identifies the suitable reference for your model and desired flow rate based on your machine's serial number.
Used hydraulic cylinders: available for all John Deere models
- Single and double-acting cylinders for lift arms, steering, and front loaders.
- Each cylinder is pressure tested in the workshop: checking the seals, rod wear, and plating quality.
- References come from dismantled John Deere tractors and combines from series 5000 to 8000.
- Also available for other major brands: Case IH , New Holland , Massey Ferguson .
- Compatibility confirmed by our technicians via the catalogue number or a photo of the original part.
Used John Deere hydraulic motors
Hydraulic motors power components without direct mechanical link to the internal combustion engine: fans, conveyors, and power steering systems on John Deere combines. TMC Bejenne offers slow and fast hydraulic motors sourced from dismantling, inspected in our workshop before resale. Compatibility depends on flow and operating pressure: provide your machine’s exact model for reliable identification.
Used hydraulic distributors: precise lift control
- Single or double-acting distributors to control the lift and attached implements.
- References compatible with John Deere tractors and combines of all generations.
- Each distributor is checked in the workshop: seals, spool operation, and leak absence.
- Also available from dismantling of Claas , Case IH, and New Holland.
- Quick identification via serial or catalogue number of the original part.
Used hydraulic power units at TMC Bejenne
A hydraulic power unit combines pump, reservoir, and motor into a single autonomous block to power an implement without an available PTO. TMC Bejenne assembles these solutions from pumps, reservoirs, and motors already in stock for John Deere and other brands. Since 1945, TMC Bejenne has supported farmers with over 25,000 references stocked on 11 hectares in Naintré, Vienne.
Identify your John Deere hydraulic pump: catalogue numbers and filters
- The catalogue number marked on the original pump remains the most reliable reference for exact identification.
- Failing that, the machine’s serial number or a photo of the defective part allows our technicians to identify a compatible pump.
- The price of a used hydraulic pump varies by model and condition, offering savings of 30 to 70% compared to new.
- Hydraulic filters also available, including common references for CNH group engines (Case IH, New Holland).
- For any hydraulic pump inquiry, please contact 05 86 24 00 26: our technicians will check stock availability before providing a quote.
The most common signs include loss of lifting power, unusual pump noise, overheating of the hydraulic circuit, or slow hydraulic movement. A pressure check by a technician confirms the diagnosis before ordering a replacement hydraulic pump.
Some failures can be repaired, such as a faulty seal or valve, but internal wear of gears or pistons often makes repair more expensive than replacement. A used hydraulic pump inspected in the workshop then offers a reliable and quick solution.
There is no single best brand: reliability mainly depends on maintenance and quality control before reinstallation. TMC Bejenne offers used hydraulic pumps for John Deere, Case IH, New Holland, Claas, and Massey Ferguson, all verified before shipping.