Q: What is the role of the shaker crankshaft in a combine harvester?

The shaker crankshaft is the component that drives the shakers of a combine harvester by transmitting an alternating motion. This movement agitates the straw to release grains still trapped after threshing. Without this part in good condition, grain loss increases and harvest yield directly decreases.

Q: Why choose a used shaker crankshaft over a new one?

The purchase price is often two to three times lower than a new original part, representing significant savings for the operation. At TMC Bejenne, each used crankshaft is inspected: bearings, functional clearances, and attack angles are verified before sale. Immediate availability from stock is another key advantage, especially valuable when a breakdown occurs during harvest.

Q: How do I identify the correct shaker crankshaft reference?

The most reliable method is to note the serial number of your combine harvester, usually found on the chassis nameplate. Knowing the brand, model, and manufacturing year is essential to find the compatible part. You can also provide the original reference marked on the faulty crankshaft directly to our advisors, who will quickly identify the corresponding part in our catalog.

Q: What quality checks do used shaker crankshafts undergo?

Each used shaker crankshaft is visually and dimensionally inspected by our technicians at our 11-hectare facility. Bearing conditions, shaft straightness, and wear in support areas are precisely measured. Only parts that comply with original tolerances are approved for sale. Crankshafts with cracks, deformations, or excessive play are systematically rejected.

Q: Which combine harvester brands are covered by the stock?

TMC Bejenne’s stock covers the leading brands on the market: New Holland, Claas, John Deere, Massey Ferguson, Case IH, Deutz Fahr, and Laverda. These manufacturers represent the vast majority of combine harvesters in France. For more specific models, feel free to contact our advisors directly at 05 86 24 00 26 to check availability.

Question 1

What is the role of the shaker crankshaft in a combine harvester?

Accepted Answer

The shaker crankshaft is the component that drives the shakers of a combine harvester by transmitting an alternating motion. This movement agitates the straw to release grains still trapped after threshing. Without this part in good condition, grain loss increases and harvest yield directly decreases.

Question 2

Why choose a used shaker crankshaft over a new one?

Accepted Answer

The purchase price is often two to three times lower than a new original part, representing significant savings for the operation. At TMC Bejenne, each used crankshaft is inspected: bearings, functional clearances, and attack angles are verified before sale. Immediate availability from stock is another key advantage, especially valuable when a breakdown occurs during harvest.

Question 3

How do I identify the correct shaker crankshaft reference?

Accepted Answer

The most reliable method is to note the serial number of your combine harvester, usually found on the chassis nameplate. Knowing the brand, model, and manufacturing year is essential to find the compatible part. You can also provide the original reference marked on the faulty crankshaft directly to our advisors, who will quickly identify the corresponding part in our catalog.

Question 4

What quality checks do used shaker crankshafts undergo?

Accepted Answer

Each used shaker crankshaft is visually and dimensionally inspected by our technicians at our 11-hectare facility. Bearing conditions, shaft straightness, and wear in support areas are precisely measured. Only parts that comply with original tolerances are approved for sale. Crankshafts with cracks, deformations, or excessive play are systematically rejected.

Question 5

Which combine harvester brands are covered by the stock?

Accepted Answer

TMC Bejenne’s stock covers the leading brands on the market: New Holland, Claas, John Deere, Massey Ferguson, Case IH, Deutz Fahr, and Laverda. These manufacturers represent the vast majority of combine harvesters in France. For more specific models, feel free to contact our advisors directly at 05 86 24 00 26 to check availability.

Question 6

How can I quickly obtain a part during peak harvest season?

Accepted Answer

During harvest, every hour of downtime matters. TMC Bejenne maintains a permanent stock of used shaker crankshafts for major brands, enabling same-day shipping for orders placed in the morning. Just call 05 86 24 00 26 with your machine’s reference, and an advisor will verify availability and prepare your part without delay.

Used Shaker Crankshaft - page 3

96 available products

Straw walker crankshaft for NEW-HOLLAND TX 34

Straw walker crankshaft for NEW-HOLLAND TX 34

Straw walker crankshaft for NEW-HOLLAND TX 34

Straw walker crankshaft for NEW-HOLLAND TX 36

Straw walker crankshaft for NEW-HOLLAND TX 36

Straw walker crankshaft for NEW-HOLLAND TX 36

Straw walker crankshaft for NEW-HOLLAND TX 36

Straw walker crankshaft for NEW-HOLLAND TX 36

Straw walker crankshaft for NEW-HOLLAND TX 36

Straw walker crankshaft for NEW-HOLLAND TX 64

Straw walker crankshaft for NEW-HOLLAND TX 64

Straw walker crankshaft for NEW-HOLLAND TX 64

Straw walker crankshaft for NEW-HOLLAND TX 65

Straw walker crankshaft for NEW-HOLLAND TX 65

Straw walker crankshaft for NEW-HOLLAND TX 66

Straw walker crankshaft for NEW-HOLLAND TX 66

Straw walker crankshaft for NEW-HOLLAND TX 68

Straw walker crankshaft for NEW-HOLLAND TX 68

Straw walker crankshaft for NEW-HOLLAND TX 68

Straw walker crankshaft for NEW-HOLLAND TX 68

Straw walker crankshaft for NEW-HOLLAND TX 68

Straw walker crankshaft for NEW-HOLLAND TX 68 PLUS

VILEBREQUIN ARRIERE DE SECOUEUR

VILEBREQUIN AVANT DE SECOUEUR