What are the symptoms of a faulty rear axle?

A grunt or whistle that changes with load, clicking noises in turns, oil leaks at the housing or hubs, or a differential lock that fails to engage. Have the cause confirmed by your mechanic before ordering: sometimes a bearing alone can be replaced without changing the whole axle. TMC Bejenne will then guide you to the compatible part.

What is the difference between an axle and a rear axle?

The axle supports the wheels, the rear axle supports and drives them. A tractor rear axle therefore contains the final drive: bevel gear, differential, and reduction gears. A non-driven axle, like that of a trailer, has no transmission components.

What is the front axle of a tractor?

It is the driven and steering axle on four-wheel-drive tractors. It receives motion via a shaft from the gearbox and the engagement is controlled from the driver’s seat. It also contains a differential and wheel reduction gears.

What oil should be used for a tractor axle-gearbox?

Most tractors use a common oil for transmission, hydraulics, and brakes, such as UTTO. Follow the manufacturer’s recommendations and the oil change intervals in the manual: unsuitable or old oil accelerates wear on the differential and oil-immersed brakes.

Which way does the rear power take-off rotate on a tractor?

Viewed from the rear of the tractor, the rear power take-off rotates clockwise, at 540 or 1000 rpm depending on the selected speed. This direction is standardized so that attached implements are interchangeable across brands. For a used power take-off , specify the number of splines on the shaft.

Used tractor rear axle | TMC Bejenne

Reduction gear for CASE IH 845 XL
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH JXU 95 ARC
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH MAXXUM 110
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH MAXXUM 125
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH MAXXUM 5120
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH MAXXUM 5140
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH MX 170
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH MX 170
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH MXM 175
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH PUMA 160
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH PUMA 180
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CASE IH PUMA 195
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CLAAS ARION 620
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CLAAS AXOS 320
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for CLAAS NEXOS 220
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for DEUTZ FAHR AGROVECTOR 30.7
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for DEUTZ FAHR DX 4.51
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for DEUTZ FAHR DX 4.51
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for DEUTZ FAHR DX 90
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for FENDT 513 VARIO
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for FENDT 926 VARIO
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for FORD 5030
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for FORD 6610
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for FORD 8240
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for FORD 8340
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JCB 526
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 3400
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 5085 M
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 5500 N
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 5720
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 6140 M
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 6310
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 6400
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 7280 R
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for JOHN-DEERE 8130
In stock, deliverable within 2-3 days
Get a quote
Reduction gear for KRAMER TARTEMPION
In stock, deliverable within 2-3 days
Get a quote

Used tractor rear axle - page 21

1115 available products

Reduction gear for CASE IH 845 XL

Reduction gear for CASE IH JXU 95 ARC

Reduction gear for CASE IH MAXXUM 110

Reduction gear for CASE IH MAXXUM 125

Reduction gear for CASE IH MAXXUM 5120

Reduction gear for CASE IH MAXXUM 5140

Reduction gear for CASE IH MX 170

Reduction gear for CASE IH MX 170

Reduction gear for CASE IH MXM 175

Reduction gear for CASE IH PUMA 160

Reduction gear for CASE IH PUMA 180

Reduction gear for CASE IH PUMA 195

Reduction gear for CLAAS ARION 620

Reduction gear for CLAAS AXOS 320

Reduction gear for CLAAS NEXOS 220

Reduction gear for DEUTZ FAHR AGROVECTOR 30.7

Reduction gear for DEUTZ FAHR DX 4.51

Reduction gear for DEUTZ FAHR DX 4.51

Reduction gear for DEUTZ FAHR DX 90

Reduction gear for FENDT 513 VARIO

Reduction gear for FENDT 926 VARIO

Reduction gear for FORD 5030

Reduction gear for FORD 6610

Reduction gear for FORD 8240

Reduction gear for FORD 8340

Reduction gear for JCB 526

Reduction gear for JOHN-DEERE 3400

Reduction gear for JOHN-DEERE 5085 M

Reduction gear for JOHN-DEERE 5500 N

Reduction gear for JOHN-DEERE 5720

Reduction gear for JOHN-DEERE 6140 M

Reduction gear for JOHN-DEERE 6310

Reduction gear for JOHN-DEERE 6400

Reduction gear for JOHN-DEERE 7280 R

Reduction gear for JOHN-DEERE 8130

Reduction gear for KRAMER TARTEMPION