Q: How to choose a suitable used Case IH cylinder?

First, verify the manufacturer's reference of your current cylinder to ensure compatibility with your tractor model. Check key dimensions such as closed length, stroke, and rod diameter. Examine the condition of sealing rings and mounts to prevent hydraulic leaks. Prefer refurbished cylinders with warranty over used parts without quality control.

Q: What are the main references for Case IH cylinders?

Case IH steering cylinders primarily use references 188842A1, 549667R91, 549667R92, 549667R93, and 186915A1. Common door gas cylinders include 3232937R1 and 3123040R1. Engine hood cylinders carry references 82011092 and 87386500, while seal kits correspond to references 83957762 and 061235R1.

Q: How to check compatibility with my Case IH tractor?

Consult your tractor’s maintenance manual or identification plate to find the serial number and manufacturing year. Use online spare parts catalogs or contact your Case IH dealer directly with this information. Carefully measure your existing cylinder and compare technical specifications with those of the replacement cylinder to ensure a perfect match.

Q: What is the service life of refurbished cylinders?

A refurbished cylinder offers a service life comparable to a new one, typically 3,000 to 5,000 operating hours depending on usage and maintenance. Professional refurbishment replaces all wear components and restores original performance, achieving 80 to 90% of the initial lifespan at 40 to 60% lower cost.

Q: How to install a Case IH steering cylinder?

First disconnect the hydraulic circuits and relieve system pressure before removing the old cylinder. Remove mounts and ball joints, noting their exact positions for reassembly. Install the new cylinder following the torque specifications in the technical documentation. Reconnect hydraulic hoses, fill the circuit, and cycle the steering several times to purge air from the system.

Q: When should cylinder seals be replaced?

Replace cylinder seals as soon as hydraulic oil leaks appear around rods or fittings. Signs of wear include reduced cylinder performance, jerky movements, or pressure loss. Also monitor for cracked, hardened, or deformed seals during regular visual inspections.

Question 1

How to choose a suitable used Case IH cylinder?

Accepted Answer

First, verify the manufacturer's reference of your current cylinder to ensure compatibility with your tractor model. Check key dimensions such as closed length, stroke, and rod diameter. Examine the condition of sealing rings and mounts to prevent hydraulic leaks. Prefer refurbished cylinders with warranty over used parts without quality control.

Question 2

What are the main references for Case IH cylinders?

Accepted Answer

Case IH steering cylinders primarily use references 188842A1, 549667R91, 549667R92, 549667R93, and 186915A1. Common door gas cylinders include 3232937R1 and 3123040R1. Engine hood cylinders carry references 82011092 and 87386500, while seal kits correspond to references 83957762 and 061235R1.

Question 3

How to check compatibility with my Case IH tractor?

Accepted Answer

Consult your tractor’s maintenance manual or identification plate to find the serial number and manufacturing year. Use online spare parts catalogs or contact your Case IH dealer directly with this information. Carefully measure your existing cylinder and compare technical specifications with those of the replacement cylinder to ensure a perfect match.

Question 4

What is the service life of refurbished cylinders?

Accepted Answer

A refurbished cylinder offers a service life comparable to a new one, typically 3,000 to 5,000 operating hours depending on usage and maintenance. Professional refurbishment replaces all wear components and restores original performance, achieving 80 to 90% of the initial lifespan at 40 to 60% lower cost.

Question 5

How to install a Case IH steering cylinder?

Accepted Answer

First disconnect the hydraulic circuits and relieve system pressure before removing the old cylinder. Remove mounts and ball joints, noting their exact positions for reassembly. Install the new cylinder following the torque specifications in the technical documentation. Reconnect hydraulic hoses, fill the circuit, and cycle the steering several times to purge air from the system.

Question 6

When should cylinder seals be replaced?

Accepted Answer

Replace cylinder seals as soon as hydraulic oil leaks appear around rods or fittings. Signs of wear include reduced cylinder performance, jerky movements, or pressure loss. Also monitor for cracked, hardened, or deformed seals during regular visual inspections.

Used Case IH Cylinder at the Best Price - page 2

77 available products

Cylinder for CASE IH AXIAL-FLOW 1680

Cylinder for CASE IH AXIAL-FLOW 2166

Cylinder for CASE IH AXIAL-FLOW 2188

Cylinder for CASE IH AXIAL-FLOW 2188

Cylinder for CASE IH AXIAL-FLOW 2188

Cylinder for CASE IH AXIAL-FLOW 2388

Cylinder for CASE IH AXIAL-FLOW 2388

Cylinder for CASE IH AXIAL-FLOW 2388

Cylinder for CASE IH AXIAL-FLOW 6088

Cylinder for CASE IH AXIAL-FLOW 6088

Cylinder for CASE IH AXIAL-FLOW 6088

Cylinder for CASE IH AXIAL-FLOW 6088

Cylinder for CASE IH AXIAL-FLOW 8230

Cylinder for CASE IH AXIAL-FLOW 8230

Cylinder for CASE IH AXIAL-FLOW 8230

Cylinder for CASE IH AXIAL-FLOW 8230

Cylinder for CASE IH CS 150

Cylinder for CASE IH CS 150

Cylinder for CASE IH CS 90

Cylinder for CASE IH LB 433

Cylinder for CASE IH LB 433

Cylinder for CASE IH MAXXUM 125

Cylinder for CASE IH MAXXUM 5120

Cylinder for CASE IH MX 110

Cylinder for CASE IH MX 170

Cylinder for CASE IH PUMA 180

Vérin for CASE IH AXIAL-FLOW 2388

Vérin for CASE IH AXIAL-FLOW 2388

VERIN HYDRO VIS DE VIDANGE

VERIN HYDRO VIS DE VIDANGE

VERIN HYDRO VIS DE VIDANGE

VERIN HYDRO VIS DE VIDANGE

VERIN HYDRO VIS DE VIDANGE

VERIN HYDRO VIS DE VIDANGE

VERIN HYDRO VIS DE VIDANGE

VERIN HYDRO VIS DE VIDANGE