Q: Which hydraulic oil should I use for a Massey Ferguson FF30?

For a Massey Ferguson FF30, it is recommended to use a universal transmission hydraulic oil type UTTO (Universal Tractor Transmission Oil), meeting Massey Ferguson specifications M1135 or M1141. A 10W-30 or 80W oil is generally suitable for this model. Always consult your tractor's user manual to confirm the exact viscosity recommended by the manufacturer according to climatic conditions.

Q: How do I identify the correct MF hydraulic part reference?

To find the exact reference of a Massey Ferguson hydraulic part , start by noting your tractor's serial number, engraved on the chassis. This number precisely determines the series and manufacturing year. Then, consult an MF parts catalog or contact an agricultural hydraulic specialist who can cross-reference this data with the manufacturer reference sought.

Q: What are the signs of a failing Massey Ferguson hydraulic pump?

A loss of lift power is often the first visible sign: the hitch rises slowly or not at all. Unusual noises like whistling or clicking near the pump also indicate internal wear. Hydraulic pressure drops, oil leaks around the pump, or heavy steering are other warning signs to monitor promptly.

Q: How often should the hydraulic circuit on an MF be maintained?

Check the hydraulic oil level every 50 hours of operation, and perform a full oil change typically every 500 to 1,000 hours depending on the model. Replace the hydraulic filter at each oil change. During heavy use periods, such as harvest, inspect hoses and fittings more frequently to detect leaks in time.

Q: Can I use a used valve block on my MF tractor?

Yes, a used hydraulic valve block can be suitable, provided certain precautions are taken. The manufacturer reference must exactly match the original model's. Upon receipt, check for cracks, scratches on the spools, and visible leaks. A poorly maintained valve block may cause pressure drops or lifting malfunctions. Consulting a specialist for inspection and installation remains the best guarantee of reliability.

Question 1

Which hydraulic oil should I use for a Massey Ferguson FF30?

Accepted Answer

For a Massey Ferguson FF30, it is recommended to use a universal transmission hydraulic oil type UTTO (Universal Tractor Transmission Oil), meeting Massey Ferguson specifications M1135 or M1141. A 10W-30 or 80W oil is generally suitable for this model. Always consult your tractor's user manual to confirm the exact viscosity recommended by the manufacturer according to climatic conditions.

Question 2

How do I identify the correct MF hydraulic part reference?

Accepted Answer

To find the exact reference of a Massey Ferguson hydraulic part, start by noting your tractor's serial number, engraved on the chassis. This number precisely determines the series and manufacturing year. Then, consult an MF parts catalog or contact an agricultural hydraulic specialist who can cross-reference this data with the manufacturer reference sought.

Question 3

What are the signs of a failing Massey Ferguson hydraulic pump?

Accepted Answer

A loss of lift power is often the first visible sign: the hitch rises slowly or not at all. Unusual noises like whistling or clicking near the pump also indicate internal wear. Hydraulic pressure drops, oil leaks around the pump, or heavy steering are other warning signs to monitor promptly.

Question 4

What is the compatibility between different MF series?

Accepted Answer

Compatibility among MF series varies by component. Some hydraulic parts from the 100 and 200 series are interchangeable, as are those from the 5400, 6200, and 6400 series, which sometimes share the same manufacturer references. However, pumps and valves from older series are not compatible with newer models. Verifying the manufacturer reference remains essential before any replacement to avoid improper installation.

Question 5

How often should the hydraulic circuit on an MF be maintained?

Accepted Answer

Check the hydraulic oil level every 50 hours of operation, and perform a full oil change typically every 500 to 1,000 hours depending on the model. Replace the hydraulic filter at each oil change. During heavy use periods, such as harvest, inspect hoses and fittings more frequently to detect leaks in time.

Question 6

Can I use a used valve block on my MF tractor?

Accepted Answer

Yes, a used hydraulic valve block can be suitable, provided certain precautions are taken. The manufacturer reference must exactly match the original model's. Upon receipt, check for cracks, scratches on the spools, and visible leaks. A poorly maintained valve block may cause pressure drops or lifting malfunctions. Consulting a specialist for inspection and installation remains the best guarantee of reliability.

Used Massey Ferguson Hydraulics - page 3

85 available products

Hydraulic for MASSEY FERGUSON 8150

Hydraulic for MASSEY FERGUSON 8170

Hydraulic for MASSEY FERGUSON 8210

Hydraulic motor for MASSEY FERGUSON 1030

Hydraulic pump for MASSEY FERGUSON 27

Hydraulic pump for MASSEY FERGUSON 7256

Hydrostatic motor for MASSEY FERGUSON 38

Hydrostatic motor for MASSEY FERGUSON 7256

MOTEUR HYDRAULIQUE

Multicoupling for MASSEY FERGUSON 1030

POMPE HYDRAULIQUE

Tank for MASSEY FERGUSON 7475

VERIN HYDRO VIS DE VIDANGE