Used Tractor & Combine Harvester Wheel Shaft

The Tractor Wheel Shaft: Role and Causes of Failure

The wheel shaft — sometimes called half-shaft or trumpet shaft — transmits the rotational torque from the differential to the drive wheel. It constantly operates under torsion and bending stresses, especially at field turns, loaded maneuvers, or when moving on rough terrain.

The causes of breakage or premature wear are varied: occasional overload, severe impact against an obstacle, metal fatigue after many years of service, or excessive play in the splines due to insufficient lubrication. On an agricultural tractor used daily, the wheel shaft is one of the parts to monitor just like the trumpet seals or hub bearings.

Used Tractor Wheel Shaft: The Solution for On-Field Breakdowns

Tractor Breakdown: Finding the Part Quickly

A wheel shaft failure rarely happens at a convenient time. During busy work campaigns — sowing, harvesting, transportation — every hour of downtime has a direct cost. New parts often have long lead times, can be unavailable for older models, and their price can exceed the residual value of the machine.

TMC Bejenne addresses this issue with a stock of agricultural tractor parts from dismantling: checked used wheel shafts identified by brand and model, available without manufacturing delays.

A Reliable Alternative to New Parts for Both Current and Older Models

Whether your tractor is a recent model or a machine over thirty years old still in service, TMC Bejenne keeps a dismantling stock covering a wide range of references. Used wheel shafts are inspected for surface condition, spline geometry, and the absence of cracks before being offered for sale.

Compatibility: All Major Agricultural Tractor Brands

Our stock of used tractor wheel shafts covers major brands commonly found on French farms, including both recent series and older models no longer available new:

• John Deere – series 30, 40, 50, 6000 and later
• Massey Ferguson – series 100, 200, 300, 6400…
• New Holland / Ford – TM, T6, T7 series, older Ford series 10
• Fendt, Case IH, Deutz-Fahr – current and older models

If your reference is not visible in the online catalog, contact our team directly: our physical dismantling stock is significantly larger than what is shown on the site.

How to Identify the Right Wheel Shaft for Your Tractor?

The wheel shaft is a part whose dimensions vary depending on the brand, model, and sometimes the axle configuration (2WD or 4WD). To avoid any ordering errors, please provide us with:

• The exact brand and model of the tractor
• The year of manufacture or serial number
• The orientation if right and left shafts differ
• The original reference number if known
• If not, the key measurements: length, diameter, spline profile

Our parts department verifies compatibility before shipping.