Q: What are the signs of a defective spindle carrier?

Abnormal play at the wheel is often the first sign to notice. The combine may also exhibit degraded handling, with unusual vibrations felt while operating. Low-speed rubbing or clicking noises are also indicators. Visually, cracks or visible deformations on the part confirm that a replacement is urgently needed.

Q: What is the difference between a left and right spindle?

The left and right spindles are symmetrical but not interchangeable : each is specifically designed for one side of the machine. Their geometry differs depending on their position on the axle, affecting alignment and installation. When replacing, it’s essential to order the correct part by specifying the side to ensure proper fitting and optimal functioning of the combine.

Q: Why choose a used part instead of a new one?

Choosing a used spindle or spindle carrier primarily allows you to achieve significant cost savings compared to new parts, sometimes up to 50% less expensive. For older agricultural machines or those for which new parts are no longer produced, it’s often the only available solution. Parts selected by TMC Bejenne are tested and inspected in our workshops, ensuring their reliability before reinstallation on your combine harvester.

Q: Which combine harvester brands are available in stock?

TMC Bejenne offers spindles and spindle carriers for the major market brands , notably John Deere, Claas, New Holland, Case IH, and Massey Ferguson. These brands represent the bulk of combine harvesters in France. Stock levels change regularly with machine arrivals. For a specific brand or model, don’t hesitate to contact our team directly to check availability.

Question 1

What are the signs of a defective spindle carrier?

Accepted Answer

Abnormal play at the wheel is often the first sign to notice. The combine may also exhibit degraded handling, with unusual vibrations felt while operating. Low-speed rubbing or clicking noises are also indicators. Visually, cracks or visible deformations on the part confirm that a replacement is urgently needed.

Question 2

What is the difference between a left and right spindle?

Accepted Answer

The left and right spindles are symmetrical but not interchangeable: each is specifically designed for one side of the machine. Their geometry differs depending on their position on the axle, affecting alignment and installation. When replacing, it’s essential to order the correct part by specifying the side to ensure proper fitting and optimal functioning of the combine.

Question 3

Why choose a used part instead of a new one?

Accepted Answer

Choosing a used spindle or spindle carrier primarily allows you to achieve significant cost savings compared to new parts, sometimes up to 50% less expensive. For older agricultural machines or those for which new parts are no longer produced, it’s often the only available solution. Parts selected by TMC Bejenne are tested and inspected in our workshops, ensuring their reliability before reinstallation on your combine harvester.

Question 4

How to verify a spindle’s compatibility with my machine?

Accepted Answer

To ensure a spindle fits your combine harvester, start by noting the manufacturer’s part number found on the original part or in your machine’s technical documents. The exact brand and model of the combine are also essential. If uncertain, the TMC Bejenne team can assist in identifying the correct part based on this information before ordering.

Question 5

Which combine harvester brands are available in stock?

Accepted Answer

TMC Bejenne offers spindles and spindle carriers for the major market brands, notably John Deere, Claas, New Holland, Case IH, and Massey Ferguson. These brands represent the bulk of combine harvesters in France. Stock levels change regularly with machine arrivals. For a specific brand or model, don’t hesitate to contact our team directly to check availability.

Question 6

How to order a spindle or spindle carrier that is not listed?

Accepted Answer

If the part you are looking for is not listed in the online catalogue, TMC Bejenne has a specialized sourcing network to locate rare or out-of-stock parts. Simply provide the combine brand, model, and part number via the contact form or by phone. Our team will conduct the search and get back to you with a proposal as quickly as possible.

Used Spindle and Spindle Carrier - page 6

193 available products

Spindle and spindle bearing for NEW-HOLLAND TX 68 PLUS

Spindle and spindle bearing for VICON 1601 RV

Spindle and Spindle Carrier for CASE IH AXIAL-FLOW 2388

Spindle and Spindle Carrier for JOHN-DEERE 9560 WTS

Spindle and Spindle Carrier for JOHN-DEERE CTS

Spindle and Spindle Carrier for NEW-HOLLAND CR 8080

Spindle and Spindle Carrier for NEW-HOLLAND CX 820

Spindle and Spindle Carrier for NEW-HOLLAND T5

Spindle and Spindle Carrier for NEW-HOLLAND T5

Spindle and Spindle Carrier for NEW-HOLLAND T5.105

Spindle and Spindle Carrier for NEW-HOLLAND T5.105

Spindle and Spindle Carrier for NEW-HOLLAND TF 76

Spindle and Spindle Carrier for NEW-HOLLAND TX 67